|
|
COLOR KINETICS ICOLOR TILE 2:2 |
| Your Price |
Shipping Information |
|
Shopping Cart
|
| 1,449.00 |
Dropships Directly from Manufacturer |
|
|
| This is a Chromacore powered 2'x2' colored-light panel that can be individually or collectively controlled. This unit can be installed behind a custom panel, or in a wall or ceiling application. There is a lens )10100004400) that is a white diffuser providing optical effects across its entire surface. Each panel has 144 individual. addressable nodes. Each tile comes with a 20' leader cable from power/data supply to panel. The power supply is the PDS-60ca 7.5V (10900001503) and it supports only one panel. Use CK ColorDial, iPlayer, or Keypad to control the tiles. |
| |
|
COLOR KINETICS ICOLOR MR16 G2 WIDE ANGLE |
| Your Price |
Shipping Information |
|
Shopping Cart
|
| 79.00 |
Immediate Shipping Available |
|
|
| iColor MR g2 is an intelligent, color changing lamp that delivers intense, saturated color and color changing effects. It has a silver housing that fits into most standard MR16 fixtures. You can have a wide beam, 60deg, or a narrow beam, 24deg along with interchangeable frosted lens and an accessory/adapter ring, 10100005000, is available for attaching lighting accessories and to ensure a proper fixture fit. The PDS-70mr 24V (1090000180X), in either DMX, Ethernet or pre-programmed is used for the power supply. Fourteen MR g2 lamps can be powered by one power supply. You can control this unit with any Color Kinetics controllers or a third party DMX controller. Reminder: If using a third party DMX controller you will need the adapter, (10400000500) to convert RJ45 to DMX 5-pin. These units come pre-addressed to #1 and for fixed color and color wash, no additional addressing is required. Further addressing can be done by SAS (Serial Addressing Software or Zapi 1.5. ***These cannot be used in a series borderlight, without re-wiring. |
| |
|
|
COLOR KINETICS ICOLOR MR16 G2 NARROW ANGLE |
| Your Price |
Shipping Information |
|
Shopping Cart
|
| 79.00 |
Immediate Shipping Available |
|
|
| iColor MR g2 is an intelligent, color changing lamp that delivers intense, saturated color and color changing effects. It has a silver housing that fits into most standard MR16 fixtures. You can have a wide beam, 60deg, or a narrow beam, 24deg along with interchangeable frosted lens and an accessory/adapter ring, 10100005000, is available for attaching lighting accessories and to ensure a proper fixture fit. The PDS-70mr 24V (1090000180X), in either DMX, Ethernet or pre-programmed is used for the power supply. Fourteen MR g2 lamps can be powered by one power supply. You can control this unit with any Color Kinetics controllers or a third party DMX controller. Reminder: If using a third party DMX controller you will need the adapter, (10400000500) to convert RJ45 to DMX 5-pin. These units come pre-addressed to #1 and for fixed color and color wash, no additional addressing is required. Further addressing can be done by SAS (Serial Addressing Software or Zapi 1.5. ***These cannot be used in a series borderlight, without re-wiring. |
| |
|
COLOR KINETICS ICOLOR COVE QL 12" |
| Your Price |
Shipping Information |
|
Shopping Cart
|
| 95.00 |
Immediate Shipping Available |
|
|
| This is a low-profile LED cove light. This unit delivers changing illumination and lighting effects to alcoves, task areas, accent areas and other confined spaces. It is encased in a vented, molded plastic housing and is available in 6" or 12" lengths with a 100deg x 40deg beam angle. To use this you will need a power supply unit, #10900002102, it can support up to 20 12" units or 36 6" units. A 30' cable leader, 108000001500, is also needed as well as jumper cables which can be either 1' or 5'. Any DMX controller unit can be used, but please be aware Color Kinetics runs their DMX over a CAT5/RJ45 cable, so you will need an adapter,104-000005-00. Also please be sure to check out the different controllers offered by Color Kinetics. |
| |
|
|
COLOR KINETICS ICOLOR COVE QL 6" |
| Your Price |
Shipping Information |
|
Shopping Cart
|
| 64.00 |
Dropships Directly from Manufacturer |
|
|
| This is a low-profile LED cove light. This unit delivers changing illumination and lighting effects to alcoves, task areas, accent areas and other confined spaces. It is encased in a vented, molded plastic housing and is available in 6" or 12" lengths with a 100deg x 40deg beam angle. To use this you will need a power supply unit, #10900002102, it can support up to 20 12" units or 36 6" units. A 30' cable leader, 108000001500, is also needed as well as jumper cables which can be either 1' or 5'. Any DMX controller unit can be used, but please be aware Color Kinetics runs their DMX over a CAT5/RJ45 cable, so you will need an adapter,104-000005-00. Also please be sure to check out the different controllers offered by Color Kinetics. |
| |
|
ROSCO LED LITEPAD 3"X3" DL |
| Your Price |
Shipping Information |
|
Shopping Cart
|
| 49.00 |
Dropships Directly from Manufacturer |
|
|
| Still drawing only a few watts of power, the DL is an Eco-friendly alternative for display, event and architectural lighting. Custom sizes are available upon request. There are accessories available, so please check them out in the LED category. Units are sold invdividually and come with a 12V transformer. This unit is a 3" x 3" square. |
| |
|
ROSCO LED LITEPAD 3"X6" DL |
| Your Price |
Shipping Information |
|
Shopping Cart
|
| 99.00 |
Dropships Directly from Manufacturer |
|
|
| This DL (daylight) LitePad consumes 25% less energy while stil providing the soft even illumination of the first LitePad. This unit was designed offering a more economical option for those applications where the increased of the HO LitePad is not neccessary. Still drawing only a few watts of power, the DL is an Eco-friendly alternative for display, event and architectural lighting. Custom sizes are available upon request. There are accessories available, so please check them out in the LED category. Units are sold invdividually and come with a 12V transformer. This unit is a 3" x 6" square. |
| |
|
|
ROSCO LED LITEPAD 3"X12" DL |
| Your Price |
Shipping Information |
|
Shopping Cart
|
| 150.00 |
Dropships Directly from Manufacturer |
|
|
| This DL (daylight) LitePad consumes 25% less energy while stil providing the soft even illumination of the first LitePad. This unit was designed offering a more economical option for those applications where the increased of the HO LitePad is not neccessary. Still drawing only a few watts of power, the DL is an Eco-friendly alternative for display, event and architectural lighting. Custom sizes are available upon request. There are accessories available, so please check them out in the LED category. Units are sold invdividually and come with a 12V transformer. This unit is a 3" x 12" square. |
| |
|
|
ROSCO LED LITEPAD 6"X12" DL |
| Your Price |
Shipping Information |
|
Shopping Cart
|
| 325.00 |
Dropships Directly from Manufacturer |
|
|
| This DL (daylight) LitePad consumes 25% less energy while stil providing the soft even illumination of the first LitePad. This unit was designed offering a more economical option for those applications where the increased of the HO LitePad is not neccessary. Still drawing only a few watts of power, the DL is an Eco-friendly alternative for display, event and architectural lighting. Custom sizes are available upon request. There are accessories available, so please check them out in the LED category. Units are sold invdividually and come with a 12V transformer.This unit is a 6" x 12" square. |
| |
|
|
ROSCO LED LITEPAD 12"X12" DL |
| Your Price |
Shipping Information |
|
Shopping Cart
|
| 500.00 |
Dropships Directly from Manufacturer |
|
|
| This DL (daylight) LitePad consumes 25% less energy while stil providing the soft even illumination of the first LitePad. This unit was designed offering a more economical option for those applications where the increased of the HO LitePad is not neccessary. Still drawing only a few watts of power, the DL is an Eco-friendly alternative for display, event and architectural lighting. Custom sizes are available upon request. There are accessories available, so please check them out in the LED category. Units are sold invdividually and come with a 12V transformer. This unit is a 12" x 12" square. |
| |
