|
|
COLOR KINETICS NXT 12" ICOLOR COVE WIDE BEAM ANGLE |
| Your Price |
Shipping Information |
|
Shopping Cart
|
| 144.00 |
Dropships Directly from Manufacturer |
|
|
| iColor Cove NXT is the widest-beam option among the iColor Cove family, bringing color and dynamic effects to alcoves, accent areas, and other tight spaces in indoor environments. It is designed for projects that require wider beam distribution, or require the fixture to be installed in a set, non-aimed position. It is also well suited for backlighting or other applications that call for uniform color mixing at a closer range. Available in 6 and 12 lengths lengths with a 100deg x 40deg beam angle. To use this you will need a power supply unit, #10900002102, it can support up to 20 12" units or 36 6" units. A 30' cable leader, 108000001500, is also needed as well as jumper cables which can be either 1' or 5'. Any DMX controller unit can be used, but please be aware Color Kinetics runs their DMX over a CAT5/RJ45 cable, so you will need an adapter,104-000005-00. Also please be sure to check out the different controllers offered by Color Kinetics. |
| |
|
COLOR KINETICS ICOLOR FLEX SL 4IN WHITE CLEAR DOME |
| Your Price |
Shipping Information |
|
Shopping Cart
|
| 564.00 |
Immediate Shipping Available |
|
|
| A multi-purpose, LED-based strand of light. It enables patterns and video on almost any interior or exterior surface. This unit has 50 individually addressable nodes on 4" centers, white with a translucent dome lenses, (Other configurations available). The Flex SLX receives power and Data from a dedicated CK 12V Chromasic power/data supply with either Ethernet, DMX512 or preprogrammed effects. (109-000020-01-DMX, 109-000020-02-Ethernet, 109-000020-000-Pre Programmed) |
| |
|
COLOR KINETICS ICOLOR MR16 G2 WIDE ANGLE |
| Your Price |
Shipping Information |
|
Shopping Cart
|
| 79.00 |
Immediate Shipping Available |
|
|
| iColor MR g2 is an intelligent, color changing lamp that delivers intense, saturated color and color changing effects. It has a silver housing that fits into most standard MR16 fixtures. You can have a wide beam, 60deg, or a narrow beam, 24deg along with interchangeable frosted lens and an accessory/adapter ring, 10100005000, is available for attaching lighting accessories and to ensure a proper fixture fit. The PDS-70mr 24V (1090000180X), in either DMX, Ethernet or pre-programmed is used for the power supply. Fourteen MR g2 lamps can be powered by one power supply. You can control this unit with any Color Kinetics controllers or a third party DMX controller. Reminder: If using a third party DMX controller you will need the adapter, (10400000500) to convert RJ45 to DMX 5-pin. These units come pre-addressed to #1 and for fixed color and color wash, no additional addressing is required. Further addressing can be done by SAS (Serial Addressing Software or Zapi 1.5. ***These cannot be used in a series borderlight, without re-wiring. |
| |
|
COLOR KINETICS ICOLOR MR16 G2 NARROW ANGLE |
| Your Price |
Shipping Information |
|
Shopping Cart
|
| 79.00 |
Immediate Shipping Available |
|
|
| iColor MR g2 is an intelligent, color changing lamp that delivers intense, saturated color and color changing effects. It has a silver housing that fits into most standard MR16 fixtures. You can have a wide beam, 60deg, or a narrow beam, 24deg along with interchangeable frosted lens and an accessory/adapter ring, 10100005000, is available for attaching lighting accessories and to ensure a proper fixture fit. The PDS-70mr 24V (1090000180X), in either DMX, Ethernet or pre-programmed is used for the power supply. Fourteen MR g2 lamps can be powered by one power supply. You can control this unit with any Color Kinetics controllers or a third party DMX controller. Reminder: If using a third party DMX controller you will need the adapter, (10400000500) to convert RJ45 to DMX 5-pin. These units come pre-addressed to #1 and for fixed color and color wash, no additional addressing is required. Further addressing can be done by SAS (Serial Addressing Software or Zapi 1.5. ***These cannot be used in a series borderlight, without re-wiring. |
| |
|
COLOR KINETICS ICOLOR COVE QL 12" |
| Your Price |
Shipping Information |
|
Shopping Cart
|
| 95.00 |
Immediate Shipping Available |
|
|
| This is a low-profile LED cove light. This unit delivers changing illumination and lighting effects to alcoves, task areas, accent areas and other confined spaces. It is encased in a vented, molded plastic housing and is available in 6" or 12" lengths with a 100deg x 40deg beam angle. To use this you will need a power supply unit, #10900002102, it can support up to 20 12" units or 36 6" units. A 30' cable leader, 108000001500, is also needed as well as jumper cables which can be either 1' or 5'. Any DMX controller unit can be used, but please be aware Color Kinetics runs their DMX over a CAT5/RJ45 cable, so you will need an adapter,104-000005-00. Also please be sure to check out the different controllers offered by Color Kinetics. |
| |
|
COLOR KINETICS CONTROLLER KEYPAD FOR IPLAYER 2 |
| Your Price |
Shipping Information |
|
Shopping Cart
|
| 271.00 |
Immediate Shipping Available |
|
|
| This keypad is a wall-mounted unit that gives you complete control over your Color Kinetics lighting equpment at the push of a button. The keypad features 8 buttons for selecting shows, onboard LEDs to indicate the current show, dimmer controls, and a master OFF switch. This keypad is designed for use with the CK iPlayer 2 (103-000007-00). Installation is easy, because it mounts into a standard US one-gang wall box and requires only four wire connections to screw terminals for data and power. |
| |
|
COLOR KINETICS ETHERNET CONTROLLED KEYPAD |
| Your Price |
Shipping Information |
|
Shopping Cart
|
| 605.00 |
Dropships Directly from Manufacturer |
|
|
| This keypad is a wall-mounted unit that allows complete control over Color Kinetics Ethernet lighting installations with a touch of a button. It is designed for use with the CK Light System Mgr (103-000015-00). This unit features 8 buttons for selecting shows, onboard LEDs to indicate current show, dimmer controls, a master OFF switch, and transitions which include: fade to black, snap, cross fade, and smooth show-to-show flow. Using this unit with Light System Mgr allows connection of multiple keypads to a CK lighting system for convenient keypad access and control of light shows. |
| |
|
COLOR KINETICS 25' CAT5 RJ45 DATA CABLE |
| Your Price |
Shipping Information |
|
Shopping Cart
|
| 39.00 |
Dropships Directly from Manufacturer |
|
|
| 25' Data Cable CAT5 RJ-45 |
| |
|
COLOR KINETICS 100' CAT5 RJ45 DATA CABLE |
| Your Price |
Shipping Information |
|
Shopping Cart
|
| 84.00 |
Dropships Directly from Manufacturer |
|
|
| 100' Data Cable CAT 5 RJ-45 |
| |
|
COLOR KINETICS 50' WIRE HARNESS FOR COVE NXT/LT |
| Your Price |
Shipping Information |
|
Shopping Cart
|
| 47.00 |
Immediate Shipping Available |
|
|
| Cable for iColor cove, iColor cove NXT and icolor cove LT, 50' with 12 pre-mounted connectors. |
| |